| 2T 50cc, 2T 200cc, 2T 400cc |
Description |
 |
The cermet surface structure created on metal friction surfaces as a result of RVS MASTER treatment is slippery even in a dry condition. It significantly decreases the risk of seizure in case of lubricants deficiency. In normal conditions the process of wearing is stopped.
The treatment with RVS MASTER decreases the friction exposed in different machines and mechanisms. The efficiency increases. The noise, vibrations and heating decrese. The fuel consumption economy is achieved. According to the experience it may achieve from 5 to 15 per cent.
The reduction of the lost motion in cylinder-piston units prevents the oil leakage into the combustion chamber. It decreases smoke including that unpleasant one of the cold engine.
|
| Instruction |
The scheme of processing |
With "RVSmaster 2-Stroke Engine Treatment" it is possible to treat two-stroke engines of the motorcycles, mopeds, boat suspended motors, motor sledges, lawn-mowers, etc. It is better to use "RVS MASTER DPS -Diesel Pump Treatment" having an empty fuel tank.
TREATMENT STEPS:
1. Thoroughly stir the bottle contents until it becomes homogeneous. No sediments are to be left on the bottom. The bottle contains 80 ml of the mixture of the synthetic oil for two-stroke engines and RVS MASTER composition.
2. The treatment of the two-stroke engines is fulfilled by adding of the bottle contents both in the gasoline and into the tank of a centralized lubricating system. 1 bottle of RVS Master 2-Stroke Treatment 50cc (200cc) is for 5 +/- 2 liters of gasoline/oil mixture. 1 bottle of RVS Master 2-Stroke Treatment 400 се is for 10 +/- 2 liters of gasoline/oil mixture.
3. To pour the prepared fuel mixture into the fuel tank or to pour the bottle contents into the tank of the crank-case lubrication system.
4. To use the engine according to its destination uninterruptedly within 1 or 2 hours starting first from the low rotation without extra loading to the engine.
For the full treatment of the worn engine it is recommended to fulfill 2 treatments. The second treatment is conducted after 4 to 6 hours of work.
|
 |
|
