Ga3,Ga4,Ga6 | FOR GASOLINE   
Ga3,Ga4,Ga6 | FOR GASOLINE   
Ga3,Ga4,Ga6 | FOR GASOLINE   
Di4, Di6, Di12, Di25, Di35, Tractor | FOR DIESEL   
Di4, Di6, Di12, Di25, Di35, Tractor | FOR DIESEL   
Di4, Di6, Di12, Di25, Di35, Tractor | FOR DIESEL   
Di4, Di6, Di12, Di25, Di35, Tractor | FOR DIESEL   
Di4, Di6, Di12, Di25, Di35, Tractor | FOR DIESEL   
Di4, Di6, Di12, Di25, Di35, Tractor | FOR DIESEL   
Tr3, Tr5, Atr7 | FOR TRANSMISSION   

When RVS-master will not help   
www.rvs-master.com Home Kontakt   RU   LV   DE   EN   PL

Chain saw Description


     The specialists of RVS have designed the composition "RVS Chain Saw Treatment" for the treatment of chain-saw engines and chains. This "2 in 1" product is used both for the treatment of the chain-saw two-stroke engines of volume capacity up to 65 cub.cm and simultaneously for the restoration of teeth and links of the chain itself. The treatment of the chain-saw chains increases the service life of the saw blade in 2 times, excludes its sagging, increases the efficiency and speed of saw.

Added into the engine together with the fuel mixture RVS composition restores the worn working surfaces of the cylinders, improves their frictional characteristics and prolongs the service life of the whole unit. For that purpose it is used only one half of the package. Another half is used for the treatment of the saw blade. The treatment of the blades is fulfilled after the dissolving of one half of the package in the standard lubricating oil. After 15 minutes of the chain-saw work after the treatment it is necessary to check the tension of the chain and, if necessary, to release it. Thus one package is enough to treat the chain-saw engine plus 1 chain, or two chains.

Instruction The scheme of processing
Attention!

TREATMENT STEPS:

1. To stir thoroughly the bottle contents (20-30 sec) until the mixture becomes homogeneous. No sediments are to be left on the bottom. One bottle contains 90 ml of the special synthetic oil and RVS MASTER composition.

2. To dissolve one half (1/2) of the bottle contents in five (5) liters of the preliminary prepared fuel mixture (gasoline + 2T motor oil).

3. To pour the ready fuel mixture, including RVS composition, into the fuel tank and let the engine work idle within 15-20 minutes.

4. To use the chain-saw according to its assignment (it is desirable within 1 hour uninterruptedly).

For the treatment of one saw chain:

One half (1/2) of the bottle contents to dissolve in 1 liter of oil used for lubricating the chain blade and use this mixture according to the instruction to the chain-saw till the full consumption of the mixture. In the same way you may treat the saw chain of the electric saws.

ATTENTION!

After 15 minutes of the chain-saw work it is necessary to check the tension of the chain on the blade. During the treatment it is recommended to check the tension of the saw chain.



   Tr3, Tr5, Atr7 | FOR TRANSMISSION
   Tr3, Tr5, Atr7 | FOR AUTOMATIC TRANSMISSION
   Ps2 | POWER STEERING
   Dp3 | DIESEL INJECTION PUMP
   2T | 2 STROKE ENGINE
   MOTOR FUSH
   Chain Saw
   GUN
   INJECTOR CLEANER
   SPRAY