| GUN |
Description |
 |
Both fighting and hunting weapons have the property to wear during their use and to rot during the storage. The snuff in the barrel is accumulated, scratches and corrosion arise on the inner surface of the barrel, the trigger and reflexive mechanisms are worn. Even if the hunting weapon does not wear so much as the battle one, preventive measures will not hurt it. RVS Master is able to prolong the life and to improve ballistic characteristics of any fire-arms. Theoretically, the cermet preventive layer which RVS creates on the working surfaces restores any rubbing pairs, especially the pair "barrel - shell", if its wear level does not exceed the critical point of 50%. Thus it optimizes such criteria as close grouping of shots, length and trajectory of the bullet flight, penetration (destructive power increases), smoothness and accuracy of the trigger work (misfires are excluded) and, finally, the steadiness of the barrel to overheats and mechanical damages.
|
| Description |
The scheme of processing |
Attention!
TREATMENT STEPS:
1. To stir thoroughly the bottle contents (20-30 sec) until the mixture becomes homogeneous. No sediments are to be left on the bottom. One bottle contains 60 ml of the special synthetic oil and RVS MASTER™ composition.
2. To disassemble the treated weapon and to treat with RVS composition the inner, working surface of the barrel and the contacting surface of the shells, as well as the details of the trigger and the reflexive-supplying mechanism, lock and firing-pin.
3. To fulfill the adjustment and the second treatment of the weapon (totally 10-15 shots).
The specialists warn: after the treatment the weapons' characteristics may continue changing during some more time, therefore the serial of control shots (if possible and necessary) should be made to the number which provides non-variable controlled indices.
|
 |
|
